Product list

Recommended Products

1/1

Water quality analysis—residual chlorine sensor

Model
Applicable IndustriesOnline monitoring of hypochlorous acid (HOCL) and residual chlorine concentration in secondary water supply, drinking water, hospital wastewater, municipal sewage, swimming pools, and industrial process water disinfection processes, as well as residual chlorine monitoring in the influent of membrane treatment processes such as reverse osmosis
CategoryResidual chlorine meter sensor
Product FeaturesSuperior circuit | Easy to install | Protection level IP68 | Sensitive response

after-sales service

Service Hotline

+86-0632-2723255 +8618363281129

Consult immediately

Product Introduction

Performance Parameters

Measurement range	0.00~20.00mg/l(ppm)
Measurement principle	Membrane method
Accuracy	2% to ±10 ppb HOCl
Temperature measurement range	0.0~60.0°C
Temperature sensor	NTC22K can be selected as PT100, Pt1000, or NTC2.252K
Response time	90% of the time is below 90 seconds
Medium flow rate	15~30L/h
Calibration method	Laboratory comparison method
Calibration intervals	Calibrate once every month
Maintain intervals	Replace or add electrolyte once every 3~6 months, and replace the membrane head every 6~12 months
Withstand voltage range	0~1bar
Shell material	ABS
Polarization voltage	50mV
Connecting threads	M39*1.5 thread
Length of the line	Standard 5 meters (customizable)
Installation method	Circulation type (circulation pool)
Protection rating	Ip68
Electrical connections	Pin-type BNC is available
Warranty	1 year

Online Message