Display

4.3-inch LCD color screen

3.2-inch LCD

Measurement range

Suspended solids/SS: 0~10mg/L, 0~400mg/L, 0~4000mg/L 0~50g/L

√

Measurement accuracy

Suspended solids/SS: ±3% F · S

√

Resolution

0.001/0.01 (depending on the electrode)

√

Isolate output current

4-20mA (load resistance <800Ω)

√

Communication interface

RS-485 Modbus standard communication protocol

√

Two sets of relay contacts

3A 240VAC, 6A 28VDC or 120VAC

√

Power supply

85-260VAC/50-60Hz or 24VDC

√

Power

≤3W

√

Quality

0.82kg

0.5kg

External dimensions

180×157×84.5mm

96×96×125mm

Install the holes

Tray mounting: 138×138mm (wall mountable)

Tray loading 92×92mm

Terms of use

Temperature 0-45°C, humidity not exceeding 85%, no electromagnetic interference

√

Electrode selection

Digital signal electrodes

√

Data features

Data storage, runtime logs, Bluetooth printing

1

Sensor size

φ50×262mm, process NPT3/4

Installation method

Circulation type

Material

304, POM, quartz glass, acrylic

Measurement Principle:
Scattered light method. The light emitted by the detector light source reflects off suspended objects suspended in the measurement solution and is installed at an angle of 130 degrees to the optical detector

It can detect reflected light (scattered light). Measurements are made based on the intensity of detected scattered light and the concentration of suspended solids in the water.
Features and Applications: The
sensor's optical window uses sapphire material, greatly reducing interference and attenuation in the optical path system, with a service life of over 2 years of imported LED light sources and reception.
Waterproof design with a waterproof lifespan of up to 2 years
. Application Fields:
Wastewater treatment plants: inlets, aeration tanks, Return sludge, primary sedimentation tank, secondary sedimentation tank, thickening tank, sludge dewatering, etc. Paper
mill: pulp concentration; Coal
washing plant: sedimentation tank, thickening tank;
Electrical: slurry sedimentation tank, power plant desulfurization lime slurry

Sensor size

φ50×262mm, process NPT3/4

Installation method

Immersion

Material

304

Measurement Principle:
Scattered light method. The light emitted by the detector light source reflects off suspended objects suspended in the measurement solution and is installed at an angle of 130 degrees to the optical detector

It can detect reflected light (scattered light). Measurements are made based on the intensity of detected scattered light and the concentration of suspended solids in the water.
Features and Applications: The
sensor's optical window uses sapphire material, greatly reducing interference and interference from the optical path system. Intelligent self-cleaning function is long-term, maintenance-free, with imported LED light source and receiver from the USA.

Service life can reach over 2 years, waterproof design with a waterproof lifespan of up to 2 years
. Application fields
: sewage treatment plants: inlets, aeration tanks, reflux sludge, primary sedimentation tanks, secondary sedimentation tanks, thickening tanks, sludge dewatering, etc. Paper
mills: pulp concentration; Coal
washing plants: sedimentation tanks, thickening tanks;
Electrical: slurry sedimentation tanks, power plant desulfurization lime slurry